Shank-type gear shaping cutter with DIN 5482
2021-10-18 13:41:41
jiangxingTools
2722
Shank-type gear shaping cutter with DIN 5482
Tooth profile to DIN5482 standard
Module: m1.6-m2.25
Number of teeth: Z5-20
Pressure angle: 30°
Morse taper: Mk2, Mk3
Shank type gear shaper cutters are full form generated however small the pitch circle diameter (PCD), although the strength of the cutter produced is the limiting factor. The strength and rigidity of shank type cutters is greatly improved by the Jiangxing Tools ribbing method and is especially advised for those of small PCD.
相關(guān)文章
-
PA20° Profile DIN3972 Standard Gear Hobber Cutter with Module m2.5
PA20° Profile DIN3972 Standard Gear Hobber Cutter with Module m2.5Tooth profile：DIN3972-2 standard,... - TIN Coated HSS M2, M35, ASP30, S390 Ground Form Relieved Gear Hob with m1-m10
- PA20° Pre-shaving Gear Hob with Module m2
- PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m1.5
- PA20° Module m3 Standard Involute Gear Hob
- PA20° DIN3972 Standard Gear Hob with Module m20
- Timing Pulley Hob for S.T.D XL(5.08)
