Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
2092
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關(guān)文章
-
PA30° DIN5480 Involute Spline Hob Cutter with Module m1
PA30° DIN5480 Involute Spline Hob Cutter with Module m1Tooth profile：GB, DIN5480 standardMaterial：HS... - PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m3
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m6
- PA30° DIN5480 Involute Spline Gear Hob with Module m1.5
- ?PA20° PCD 50mm Bowl Type Gear Shaper Cutter with Module m1~m3.5
- PA20° Profile DIN3972 Standard Gear Hobbing Cutter with Module m2.25
- Gear hobs with protuberance for involute gear froms
