Pre-cutting disc-type gear shaper cutter with DIN 3972/III
2021-10-18 11:51:13
jiangxingTools
3227
Pre-cutting disc-type gear shaper cutter with DIN 3972/III
Tooth profile is according to DIN3972-3 standard
Module: m1-m6
Number of teeth: Z20-124
Pressure angle: 20°
Bore: 44.443mm
The standard gear shaping tools are manufactured from HSS M35, ASP2052 / S390 material with an Alcrona Pro coating. Here you will find the available models in the category disc-type shaper cutters DIN 3972/III. The stock shaper tools are available within a short space of time, and include a measurement.
相關(guān)文章
-
Hob Coating
Hob CoatingA hard coating with a thickness of 2-3um increase the life of the hobs, or permits higher... - Shank-type gear shaping cutter with DIN 5482
- PA20° Standard Involute Gear Milling Cutter with Module m5.5
- RS60 Roller Chain Sprocket Hob with Pitch 19.05 x Roller Dia. 11.91
- PA20° Module m4.5 Standard Involute Hob
- PA20° DP18 Standard Involute Hob Cutter with BPⅡ
- PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
